Published on: June 4, 2022
Written by Ferris Jacob / Fact-checked by Samrul Alom
Imagine you bought a Fold And Go trampoline for your kids. And, you have installed it and used it for quite a while. But now, you want to unfold it and shift it to your new home. In this case, how do you fold up the Fold And Go trampoline?
That is where we step in. We’re here to help you and guide you through the processes of how to fold up the Fold And Go trampoline. You need to spend a few minutes and give this article a good read.
Along with the procedures of folding The Fold And Go trampoline, we have also provided other related info that you might need. So, sit down, have a cup of coffee and go through this discussion in one big scoop.
How to Fold Up the Fold and Go Trampoline? [Full Disassembly Guide]
If you have had the professionals install the Fold And Go trampoline for you, you probably don’t have a clue how to fold it down. But, don’t worry. Follow the steps we mentioned below, and you’ll be fine.
1. Uninstalling the Handlebar Top
You should notice that the handlebar top of the trampoline is attached to the handlebar base by 2 screws. You have to use a screwdriver to uninstall the 2 screws. Steadily unscrew the 2 screws and pull out the handlebar top. The handlebar top should come out very easily.
2. Uninstalling the Handlebar Base
In this step, you’re going to detach your handlebar base. You should notice that the handlebar base is also attached to the trampoline’s mainframe by 2 screws. You have to unthread the 2 screws, and then the handlebar base should come out pretty easily.
Use a strong screwdriver to unscrew the handlebar. If the 2 screws are rusty and aren’t coming out, put a bit of machine oil on them and try uninstalling them. You should be able to uninstall the screws within a minute.
3. Uninstalling the Safety Cover
Now, it’s time to pull the safety cover off of your Fold And Go trampoline. To do that, you’ll have to untie the safety cover from 6 attachment points. The safety cover stays steady on the trampoline because it’s tied to the main metal frame by 6 different elastic cords.At this point, manually untie the safety cords with your hand and pull the trampoline safety cover off.
4. Unthreading the 6 Legs
You’ll have to uninstall the 6 legs attached to the mainframe at this step. You’ll notice that the legs are attached to the mainframe because they are tightly threaded.
You have to grab the legs with your hand and unthread them in the counterclockwise direction. Twist the legs to the counterclockwise direction with all your strength. As a result, you should see the legs slowly being unthreaded. And just like that, you can uninstall all 6 of the legs.
5. Fold the Main Frame
It is the last and final step of folding down your Fold And Go trampoline. In this step, you’ll have to fold the trampoline’s mein circular frame according to its native mechanism. You’ll notice that there are 4 hinges on the circular frame of the trampoline. These hinges facilitate this trampoline to fold itself twice.
After folding the mainframe of the trampoline, you are done. Now, you can pack all the components in one place and shift them to your new home. Here you also know about how big a trampoline box is?
How to Unfold Fold And Go Trampoline?
Technically, you’ll have to follow the uninstallation guide in reverse order in this section. This way, you can easily unfold and assemble the Fold And Go trampoline. But don’t worry, we have laid down the installation steps in the below discussion for you. Just follow them according to our guide.
1. Unfolding the Main Frame
The first step in assembling the Fold And Go trampoline is to unfold the mainframe. The mainframe is folded twice when the manufacturer packs it. After unpacking it, you have to unfold it twice to get it in a circular shape.
2. Installing the Legs
After you have unfolded the mainframe of the trampoline, flip it over and install the 6 legs. To install these legs, you’ll have to unpack them and thread them in their respective positions. You should notice that there are 6 designated threading positions for 6 legs. Install each leg one by one.
3. Putting the Safety Cover On
At this step, you’ll have to flip the trampoline again and put the safety cover on the mainframe of the trampoline. The manufacturer provides a safety cover to protect the trampoline against external damage.
When installing the safety cover, don’t forget to match the designated hole in the safety cover with the handlebar installation points. There are 2 holes in the safety cover that should match the 2 handlebar installation points.
Now that you have put on the safety cover, flip the trampoline over, and you’ll notice that there are 6 elastic cords to secure the safety cover to the mainframe. You’ll have to firmly tie these 6 safety cords to the mainframe of the trampoline. It will keep the safety cover steady on the trampoline’s structure. Do you know a trampoline box will fit in a car?
4. Installing the Handlebar Base
Now, unpack the handlebar base and put it in its designated position on the mainframe of the trampoline. For the 2 legs of the handlebar base, you should see 2 installation points on the mainframe of the trampoline.
Put each leg on their designated installation points, and install the screws to secure them. You will also notice that the manufacturer provides 2 screws for each leg of the handlebar base. Use a screwdriver to thread the screws tightly. Make sure the handlebar base is fully stable.
5. Installing the Handlebar Top
Now, as the last step, you have to install the handlebar top. To do that, unpack the handlebar top and put it on the handlebar base. You will easily tuck 2 legs of the handlebar top into their designated position on the handlebar base.
After putting the handlebar top on, you’ll notice that the manufacturer provides 2 screws for each leg of the handlebar top. Install the screws steadily for each leg of the handlebar top. To do that, tightly thread the screws into their position.
There you go. You have completely unfolded the Fold And Go trampoline.
How Do You Fold A Small Trampoline? [In Easy Steps]
Folding a small trampoline is easy. Just follow the below-mentioned basic steps. These steps should apply to all types of small trampolines.
1. Uninstall the handlebar top.
2. Dissemble the handlebar base.
3. Pull the safety cover of the trampoline off.
4. Disassemble the legs of the trampoline.
5. Fold the mainframe of the trampoline.
And, this is it. These are the basic folding steps of a small trampoline.
Concluding Words
To sum it all up, unfolding or folding the Fold And Go trampoline is a matter of a few minutes. You don’t need any professional help to do this. You have to follow the installation steps precisely as we have mentioned in the above discussion on “how to fold up the Fold and Go Trampoline?”.
In short, to fold up a trampoline, you have to unscrew all the parts and disassemble them one by one. On the other hand, if you want to unfold the trampoline, you’ll have to assemble each part one by one and put their respective screws in their positions and thread them tightly. Anyway, after reading this guide, we believe you can fully handle your kid’s trampoline by now. So, We bid you farewell.
